Subaru has made quite a name for itself as one of the most reliable adventure vehicle manufacturers. But even with the toughest of vehicles, wear and tear of the braking system is unavoidable. This is why it’s important to know the signs of a brake malfunction, so you can get brake repair at a Subaru dealer before it is too late.
4 Signs You Should Talk to a Subaru Dealer about Brake Repair
1. Squeaking or Grinding Noise
If you hear squeaking or grinding when braking, it’s a sign your vehicle needs a brake job. This noise is usually caused by metal-on-metal contact between the caliper and rotor because your brake pads are worn down.
Replacing the pads will solve the problem, but ignoring the squeak could lead to expensive jobs like rotor replacement or caliper repair. That’s why you want to get the brakes inspected as soon as you hear any strange noises.
2. Vibrations in the Brake Pedal
If you’re feeling vibrations or pulsations in the brake pedal, it’s a sign of an uneven surface on your rotors. This issue can be the result of excessive wear and tear, and the solution is replacing or resurfacing the rotors.
If you experience this vibration, the brakes may not function optimally, and you may even have difficulty stopping your vehicle in an emergency. The steering wheel may also vibrate when driving, which is another glaring sign of warped rotors.
3. Dashboard Warning Light
Subaru vehicles are equipped with a brake warning light that illuminates when there’s an issue. If you see this light, take your car to a dealer immediately, even if the brakes still work.
It could be something as simple as adjusting your brakes or an issue with some of the sensors in the brake line. Or it could be serious problems, such as a rotor replacement or caliper repair. Whatever the issue, having the light addressed sooner rather than later can save you time and money in the long run.
4. Pulling to One Side
If your vehicle pulls to one side when coming to a stop, you are looking at a serious brake issue. This can be caused by worn brake pads or calipers, defects in your braking system, or even something as simple as low brake fluid levels. You may also notice this issue if your brake linings are unevenly worn.
No matter the cause, this problem can put you and other drivers at risk, so get it checked out as soon as possible.
If you notice any of these signs in your Subaru, don’t drive it again. Visit Jim Keras Subaru Hacks Cross today for a brake system inspection and repair. Our experienced service technicians will get you back on the road safely.
Connect with us
Archives
Categories
